Hartman Scale HI2151 Digital Indicator

FEATURES:

• Nema 4X Panel Mount enclosure
• Waversaver: vibration elimination
• Accuracy: .0015% non linearity
• Temperature Range: 14 to 122 Deg. F.
• Power: 120 or 240 VAC 50/60 HZ
• Load cell Excitation: 10 VDC
• Power up to 8 - 350 ohm cells
• Depth behind panel: 10 inches
• Panel Cut-out: 3.09" x 5.75"
• Setpoints: (2 internal)

OPTIONS:

• Analog Output of Net, Gross,Rate-of-change, Total or Peak Weights:

  Resolution: 16000 count, I = 0-20 or 4-20 mA, VDC: 0-5 or 0-10 VDC

• Parallel BCD:

  6 digits of data representing Net, Gross, Tare or display with tri-state
  capability.

• RS232 or Current Loop:

  Bidirectional or output only, with 6 selectable baud rates.

• EIA-422 or EIA-485

  Bidirectional or output only, full duplex capability with 6 selectable baud rates. Multidrop communication when used with Allen Bradley (tm) interface.

• TTL Level Output:

  Six external setpoints, each with 500 milliamp sink, can independently monitor Net, Gross, Rate-of-change, Peak Hold or Total.

• Setpoint Relay Option Board:

  Six additional opto-isolated solid state relays each rated at 115 VAC, 3 Amp.

  Operates from TTL level outputs.

• Totalization:

  Maintains a running total of net weight activated by contact closure. Total weight can be viewed or transmitted.

• Rate Of Change:

  Computes the current flow rate into or out of the scale and displays and /or transmits as a change in weight per unit time.

• Peak Hold:

  Monitors and stores the highest value measured until cleared by operator or from remote command.

• Allen Bradley Interfaces:

  Two dedicated interfaces available in single or multi-drop configurations.

• C2 Calibration:

  When used with "C2" load cells and junction box the C2 calibration feature on some applications can eliminate the need for test weights. The instruments "reads" the load cell information and calibrates itself with the information gathered from the load cells.