Features:- 10,000 Display resolution (NTEP pending)
- 10 Pre-defined Tare value
- Selectable kg/lb/g/oz
- Programmable as Main Indicator & Remote Display
- Programmable custom print format
- Configurable for Animal Weighing Application
- Easy Panel Mount Design
- Optional Re-Chargeable battery
Specifications:- Internal Resolution - 1,000,000 counts at 3mV/V
- Display Resolution - Selectable
- Input Sensitivity - 1µV/graduation typical, 0.4µV/graduation minimum
- Display Increments - Selectable x1, x2, x5, x10, x20, x50, x100
- Decimal Point Location - Selectable 0 ~ 4
- Display - 7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with annunciators (7 LED lamps) for function select, Stable, Center Zero, Net, Print, kg, lb, and Low Battery display 135
- Keyboard - 6 button keypad with tactile keys (includes 1 button for Power On/Off)
- Audio Alarm - Tone for key entry confirmation and low battery alarm
- A/D Conversion Rate - 7.5 updates per second
- Load Cell Excitation Voltage - 9.7VDC or 5VDC selectable. Drive up to six 350 ohm load cells
- Analog Input Range - 0.2mV/V to 3.0 mV/V maximum
- Non-Linearity - 0.01% of full scale or less
- Over Capacity - Display “CAP OL” when exceeds the full scale capacity
- Tare - Full capacity, push button tare
- Auto Zero Tracking - Selectable to 3.0 d by 0.5 d step
- Motion Window - Key-in data 0..255 (1 = 0.5 d)
- Calibration Method Software – Menu driven prompting
- Units of Measure - Selectable kg/lb/g/oz, up to 2 units displayable
- RFI/EMI Protection - All signal and excitation lines filtered to –65db min. @ 500MHz
- Filtering - Selectable digital filter
- Serial RS232C Data Output - COM Port 1. Full Duplex or Bi-directional; COM Port 2. Simplex or Unidirectional (output only) Selectable baud rates (1200,2400,4800,9600,19200), manual or auto print, continuous data out or bi-directional communication
- Remote Display - Programmable as Remote Display
- Print Format - Gross Wt, Tare Wt, Net Wt
- Power - 100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12 VDC 2-2.3AH Rechargeable Sealed Lead Acid Battery (Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional)
- Current - Consumption 100mA + 30mA per 350 ? load cell
- Operating Temperature - -10°C to + 40°C
- Relative Humidity - Maximum 90% RH, Non-condensing
- Shipping Weight - 1.2kg (2.3kg with optional battery
- Enclosure - ABS Plastic Casing
- Warranty - One Year Limited Warranty
|
