Intercomp CW250 Portable Electronic Platform Scales

With its compact design, plus easy portability, the Intercomp Model CW250TM Scale is ideal for weighing 55-gallon drums, chlorine cylinders, propane bottles, freon tanks, hazardous medical wastes and other liquid or gaseous containers. But those are just a few uses. Think of the many other items in your plant that you can weigh with it.

It's available in twelve high performance models with capacities ranging from 300 to 2,000 lb/150 to 1,000 kg. There are two sizes of weigh platforms: 15" x 15"x4"/380x3803100 mm, and 24"x24"x4"/610x610x100mm. This rugged, all aluminum, self-contained unit provides accuracy of ±0.1% (NTEP Class III) of applied load.

Fully battery operated, this Intercomp scale requires only infrequent recharging from any 12, 120 or 220 volt power source (charger adaptor and cable provided). For night use, you light up the display area by just touching the "lamp" switch. to record weights, the scale will interface with an optional printer or display (such as our P-DP printer or SA2000 display).

Features:

• Ideal for drums, chlorine cylinders, hazardous medical waste and other containers
• Capacities ranging from 300 to 2,000 lb/150 to 1,000 kg
• All aluminum self contained unit provides accuracy of ±0.1%
• Available in 15 x 15 or 24 x 24 inch/metric equivalent
• Can interface with an optional printer or remote display
• Accumulation and printout of multiple weights

Options:

• Remote Indicator (Pedestal, floor or wall)
• 220V, 50Hz Charging Transformer
• 20mA Current Loop/RS232 Output
• Ramp
• Battery Operated Tape Printer
• Transport Wheels

Specifications:

• Data Interface: 20mA current loop/RS232 Output
• Batteries: Six AA 1.2 volt nickel cadmium (standard), or six AA 1.5 volt alkaline
• Battery Life: Approximately five years (1500 charge/discharge cycles.)
• Battery duration between charges: Approximately 8 hours of continuous use before the low battery indicator comes on, and up to two hours after that before the scale automatically shuts itself off. (These numbers are lowered by use of lamp or active current loop transmission.)
• Charging Voltage: 11.5 volts to 14.5 volts DC. Protection is provided for accidental reversal of charging connections.
• Charging Current: Starts at 300mA and drops down to 50mA after 8 hours.
• Charging Time: 8 hours if the batteries are discharged to the point of shutting off the scale.
• Construction: All aluminum design provides EM/RFI immunity.
• Accuracy: ±0.1% of applied load (NTEP Class III)
• Humidity: 5 to 95% Non-Condensing
• Operating: -28°C to 65°C / -20°F to 150°F
• Storage: -40°C to 75°C / -40°C to 170°F
• EMI/RFI: Meets Mil Spec 461
• Dimensions and weight: 24x24x4"/610x610x100mm; 85 lbs./39 kg; 15x15x4"/380x380x100mm; 38 lbs./17 kg
• Case: Aluminum
• Voltage; Self-contained nickel cadmium batteries (standard) or alkalines. Integral recharger to charge or operate from a 12, 110 or 220 volt power source
• General: All located on waterproof membrane keypad with large contact surfaces.
• Print: Outputs weight local
• On/Off: Two separate switches for unambiguous operation.
• Zero/Test: Pushbutton zero checks for motion to HB-44. Test performs internal test.
• Hold/Release: Hold places scale in automatic capture mode for in-motion weighing. Release places scale in "normal" static weighing mode.
• Lamp: Momentary action to activate high efficiency light emitting diodes for night usage.
• lb/kg: Sets unit of measure
• Local/Total: Local is the standard mode for weighing. Total enables the scale to accumulate weights with other similar scales.
• Total: Accumulative mode of weighing
• Battery: Low battery
• Hold: In-motion weighing mode
• lb/kg: Unit of measure
• Speed: 950 milliseconds to typical reading (static).
• Accuracy: ±0.1% of reading static mode. ±0.2% of reading holding mode.
• Units: lb, kg selectable
• Safe Overload: 150% of capacity